Table of Contents
Advertisement
6 USING THE SYSTEM
6.5 Total Data and Manual Cut-Off Processing
6.5.1 Displaying total data by indoor unit
Use this screen to check total data such as the operating time and the number of operations for
each indoor unit.
Procedure
Select 2.Total data/Cut-off in the main menu and 1.Each I/D unit in the sub menu.
A Selects the tenant to display.
B Selects either the current or the past (maximum 24 months) cut-off data.
C Selects the time zone to display.
* This button will be invalid when setting the mode at "No Distrib.". (see
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
A
D If you want to display operating time by fan speed, touch Operating time . The display
changes as shown below.
CZ-256ESMC1U̲改.indb 39
CZ-256ESMC1U̲改.indb 39
1.Each I/D unit
1.All hours
2.Each tenant
2.Regular hours
3.Each O/D unit
3.Out of hours
4.Pulse meter
4.Special Day
5.Cut-off/Data backup
39
Main
5
1
5
1
)
Main
Sub
C
D
4/Aug 3:10PM
B
2
1
2
1
Sub
2011/11/11 11:25:26
2011/11/11 11:25:26
Advertisement
Table of Contents
