Previous Values - ABB A43 User Manual

Hide thumbs Also See for A43:
Table of Contents

Advertisement

Technical Description

5.9 Previous Values

At the end of a defined period, up to 50 configurable channels, which can contain
General
energy register values, input counter values and currency/CO
together with the time/date for the end of the period.
Previous values can be configured via Modbus and EQ-bus communication or
via the buttons on the meter.
Note –
Changing time/date into another period than the pending period will store
the current period and start a new one.
If a power fail occurs that lasts over the end of an ongoing period, the period will
be stored when the meter powers up again and a new period will start. If the
meter have lost time and date/time is not set when the meter powers up again,
previous values will enter a waiting state until time/date is set.
Storing periods
Previous values has 50 channels which can be configured individually via
com-munication. Each channel can store up to 200 periods.
The period length can be a day, a week or a month and can be configured
via Modbus and EQ-bus communication or via the buttons on the meter.
The period date and time is stored as end of period. For instance, if a period starts
2010.01.01 00:00.00 and ends 2010.01.02 00:00.00, then the stored period will
be 2010.01.02 00:00.00.
Stored periods can be read via communication or directly on the display.
If there is no free memory space available, the oldest period will be erased
to make room for the most recent one.
It is possible to erase all stored periods by sending a "Reset Previous
Values" command via communication.
Selectable
Depending on the meter type all or a subset of the following quantities can
quantities
be selected.
ACTIV ENERGY IMPORT TOTAL
ACTIVE ENERGY EXPORT TOTAL
ACTIVE ENERGY IMPORT L1
ACTIVE ENERGY IMPORT L2
ACTIVE ENERGY IMPORT L3
ACTIVE ENERGY EXPORT L1
ACTIVE ENERGY EXPORT L2
ACTIVE ENERGY EXPORT L3
REACTIVE ENERGY IMPORT TOTAL
A43/A44
User Manual
Before any previous values can be stored, time/date must be set.
70
values, are stored
2
ACTIVE ENERGY IMPORT TARIFF3
ACTIVE ENERGY IMPORT TARIFF4
REACTIVE ENERGY IMPORT TARIFF1
REACTIVE ENERGY IMPORT TARIFF2
REACTIVE ENERGY IMPORT TARIFF3
REACTIVE ENERGY IMPORT TARIFF4
REACTIVE ENERGY EXPORT TARIFF1
REACTIVE ENERGY EXPORT TARIFF2
REACTIVE ENERGY EXPORT TARIFF3
2CMC48001M0201
Revision: C

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

A44

Table of Contents