ABB A43 User Manual page 151

Communication with Modbus
Quantity
Apparent power L3
Power factor total
Power factor L1
Power factor L2
Power factor L3
Harmonic voltage L1
Harmonic voltage L2
Harmonic voltage L3
Harmonic voltage L1-L2
Harmonic voltage L2-L3
Harmonic voltage L1-L3
Harmonic current L1
Harmonic current L2
Harmonic current L3
Harmonic current Neutral
Inactive (deactivates the alarm)
The Thresholds registers are used to read and write the ON and OFF threshold
Thresholds
values for an alarm. The scaling is the same as where the quantity appears in the
registers
normal mapping tables. The first (lowest) 4 registers are the ON threshold and the
last 4 registers are the OFF threshold. Data type is signed 64 bit integer.
The Delays registers are used to read or write the ON and OFF delays for an
Delays registers
alarm. The delay is expressed in milliseconds. The first (lowest) 2 registers are the
ON delay and the last 2 registers are the OFF delay. Data type is unsigned 32 bit
integer.
The Actions registers are used to read or write the actions to be performed when
Actions registers
an alarm triggers. The first (lowest) register holds the actions to perform. The
2CMC48001M0201
Revision: C
OBIS code
1.0.140. 7.0.255
1.0.13.7.0.255
1.0.33.7.0.255
1.0.53.7.0.255
1.0.73.7.0.255
1.0.32.7.124.255
1.0.52.7.124.255
1.0.72.7.124.255
1.0.134.7.124.255
1.0.135.7.124.255
1.0.136.7.124.255
1.0.31.7.124.255
1.0.51.7.124.255
1.0.71.7.124.255
1.0.91.7.124.255
1.128.128.128.128.128
151 A43/A44
User Manual