ABB A43 User Manual page 41

Meter Settings
Step
7
Protocol details The following table shows the intervals and options for the different protocols:
Table: 4:5
Protocol Access Upgrade
level Mode
EQ-Bus - -
(when
used
through
RS-485)
Modbus - -
(when
used
through
RS-485)
M-Bus Open, Active,
(when Password, Not Active Never,
used Closed
through
IR-Side)
2CMC48001M0201
Revision: C
M-Bus
Press once to get to the next
menu. The display will show the
Send status info. See
Table 4:5
options. Set the send info status.
Press once to get to the next
menu. The display will show if the menu. The display will show pass-
password is to be reset. See
for options. Set the op-
Table 4:5
tion.
Press once to get to the next
menu. The display will show the
upgrade mode. See
Table 4:5
options. Set the upgrade mode.
Send Reset Parity Baudrate Address
Status password
Info
- Yes, No -
- - None,
Odd,
Even
Always, Yes, No -
When
not OK
41
EQ-Bus
Press once to get to the next
menu. The display will show the
for Inac. TO. See
Table 4:5
Set Inac. TO.
Press once to get to the next
word reset option. Set if the pass-
word shall be reset or not.
for
Inter
octet
timeout (ms)
(ms)
1200, 16-16381 20-6000 0-2000
2400,
4800,
9600,
19200,
38400,
57600,
115200,
125000,
230400,
250000,
460800
1200, 1-247 -
2400,
4800,
9600,
19200,
38400,
57600,
115200
2400, 1-250 -
4800,
9600,
19200
for options.
Inactivity
timeout
-
-
A43/A44
User Manual