ABB A43 User Manual page 125

Communication with Modbus
Averages of instrumentation values
Averages of instrumentation values are used in load profile recording.
The following table lists the OBIS codes for averaging of instrumentation values:
Quantity
Voltage L1
Voltage L2
Voltage L3
Voltage L1-L2
Voltage L2-L3
Voltage L1-L3
Current L1
Current L2
Current L3
Current N
Power factor total
Power factor L1
Power factor L2
Power factor L3
Min/Max of instrumentation values and powers
Minimum and maximum of instrumentation values and powers are used for
the Demand function. In the table below the byte shown as X can have any of
the values 3, 6, 13 or 16. The meaning of these values is described after the
OBIS code table.
The following table lists the OBIS codes for minimum/maximum
of instrumentation values and powers:
Quantity
Voltage L1
Voltage L2
Voltage L3
Voltage L1-L2
Voltage L2-L3
Voltage L1-L3
2CMC48001M0201
Revision: C
OBIS code
1.0.32.27.0.255
1.0.52.27.0.255
1.0.72.27.0.255
1.0.134.27.0.255
1.0.135.27.0.255
1.0.136.27.0.255
1.0.31.27.0.255
1.0.51.27.0.255
1.0.71.27.0.255
1.0.91.27.0.255
1.0.13.27.0.255
1.0.33.27.0.255
1.0.53.27.0.255
1.0.73.27.0.255
OBIS code
1.0.32.X.0.255
1.0.52.X.0.255
1.0.72.X.0.255
1.0.134.X.0.255
1.0.135.X.0.255
1.0.136.X.0.255
125 A43/A44
User Manual