Settings And Configurations; Setting Date - ABB A43 User Manual

Meter Settings

4.1 Settings and Configurations

Depending on the meter type, all or a subset of the following functions can be
Configurable
configured:
functions
Setting a value When setting a value, the
set option involves setting a number, for example a alarm limit, the
used to increase a digit, and the
button is used to toggle between digits.The option/digit that is active for setting is
marked with a underscore. When the underscore on the last option has dissa-
peared, the setting has been performed.

4.1.1 Setting Date

To set the date, perform the following steps:
2CMC48001M0201
Revision: C
• Clock
• Ratios
• Wires
• Pulse output (Pul.Out.) on display
• I/O Pulse output (Pul.Out.) on display
• Alarm
• Currency/CO
(Curr/CO2) on display
2
• M-Bus
• RS-485
• IR Side
• Wireless (W-less on display)
• Upgrade Consent (Upgr.Cons) on display
• Pulse LED (Puls.LED) on display
• Tariff
• Previous Values (Prev. Val. on display)
• Load profile (Load Pro on display)
• Demand
• Resettable registers (Rst.Rg on display)
buttons are used to change the options that can be set, such as on or off. If the
1. Choose the Settings icon in the main menu, press
2. Choose "Clock", press
3. The display will now show the date.
4. Set the date.
button is used to activate the set option. The
button is used to decrease a digit. The
.
33
and
button is
.
A43/A44
User Manual