Meter Settings
Protocol
Access
Upgrade
level
mode
EQ-Bus
-
-
(when
used
through
IR-Side)
4.1.12 Setting Upgrade Consent
Upgrade Consent can be set to Allowed or Not Allowed. Setting it to Allowed
means you agree to updates of the meter. Setting it to Not Allowed means no
upgrades will take place.
To set Upgrade Consent, perform the following steps:
4.1.13 Setting Pulse LED
To set pulse LED, perform the following steps:
4.1.14 Setting Tariff
The tariff source can be set to input, clock or communication. To set the
tariffs, perform the following steps:
Step
1
2
A43/A44
User Manual
Send
Reset
Status
password
Info
-
Yes, No
1. Choose the Settings icon in the main menu, press
2. Choose "Upgrade Consent" (Upgr.Cons on the display), press
3. Press
to set Upgrade Consent.
1. Choose the Settings icon in the main menu, press
2. Choose "Pulse LED" (Puls.LED on the display), press
3. Press
to set the type of energy, active or reactive, that the LED shall
indicate on.
Input
Choose the Settings icon in Choose the Settings icon in
the main menu, press
Choose "Tariff", press
42
Parity Baudrate Address
-
1200,
2400,
4800,
9600,
19200
Clock
.
the main menu, press
Choose "Tariff", press
.
Inter
Inactivity
octet
timeout
timeout (ms)
(ms)
.
.
.
.
Communication
Choose the Set-
.
tings icon in the
main menu, press
.
.
Choose "Tariff",
.
press
2CMC48001M0201
Revision: C