Table of Contents
Advertisement
Documentation set
VISULAS green
Action
Action
000000-2096-101-DokS-en-GB-150322
5 Daily startup
5.1 Preparation safety
Prior to using the system, the user must ensure that it is in a good
condition and fully functioning. Furthermore, the user must follow the
instructions in the instructions for use. The following inspections must
be carried out each working day prior to use:
Visual inspection of device, power cable and accessories to ensure
u
that they are present and intact. If parts are missing or damage is
visible, the system should not be used and should be taken out of
service.
Check the ventilation slits on the devices. Do not cover or obstruct
u
them.
5.2 Switching on
Switch the system on using the laser console key switch.
u
ð The first work step "Configure" will be displayed.
Figure 14: Work step "Configure"
NOTE! When switching on the system, make sure that no USB
storage device is plugged into the USB port of the TouchControl
panel (control unit).
5 Daily startup
5.1 Preparation safety
51 / 136
Advertisement
Table of Contents
