Download  Print this page

Honeywell 3 Nm Series Installation Instructions Manual

Spring return direct coupled actuators.
Hide thumbs

Advertisement

N314
MS3103, MS3105, MS4103, MS4105, MS7403, MS7405,
MS7503, MS7505, MS8103, MS8105 Spring Return Direct
Coupled Actuators (DCA) are used within heating, ventilating,
and air-conditioning (HVAC) systems. They can drive a variety
of quarter-turn, final control elements requiring spring return
fail-safe operation.
Applications include:
• Volume control dampers, mounted directly to the drive
shaft or remotely (with the use of accessory hardware).
• Quarter-turn rotary valves, such as ball or butterfly valves
mounted directly to the drive shaft.
• Linear stroke globe or cage valves mounted with linkages
to provide linear actuation.
• Available with cable on select models
Model Number
Model Number
(including 3 ft. whip)
MS3103J1030
MS7403A2030
MS7503A2030
MS7503A2130
MS8103A1030
MS8103A1130
MS4103A1030
MS4103A1130
MS3105J3030
MS3105J3130
MS7405A2030
MS7505A2030 MS7505W2030
MS7505A2130 MS7505W2130
MS8105A1030 MS8105W1030
MS8105A1130 MS8105W1130
MS4105A1030
MS4105A1130
1
Number represents range
2
2-10 Vdc
3
0/2-10 Vdc
3 Nm, 5 Nm Series Spring Return
Direct Coupled Actuators
MS3103, MS3105, MS4103, MS4105, MS7403, MS7405, MS7503,
MS7505, MS8103, MS8105
Table 1. Models.
Power Supply
VA
Torque
Voltage
Driving
27 lb-in
24 Vac/dc
6/3
(3 Nm)
@50/60 Hz +/-
20%
24Vdc+/-10%
100-250 Vac
6/9
@50/60Hz
44 lb-in
24 Vac/dc
6/3
(5 Nm)
@50/60 Hz +/-
20%
24Vdc+/-10%
100-250 Vac
6/9
@50/60Hz
INSTALLATION INSTRUCTIONS
SPECIFICATIONS
Models:
 See Table 1.
Device Weight:
 3.5 lbs (1.60 kg)
Ambient Operating Temperature:
 -40° to 150°F (-40° to 65°C)
 -22° to 150°F (-30° to 65°C) (Two position only)
Shipping and Storage Temperature:
 -40° to +150°F (-40° to +65°C)
Drive
1
(sec)
Control Input/Output Description
90
Sylk-enabled
2
Floating, Modulating
3
Floating, Modulating
45
Two-Position (SPST)
45
Two-Position (SPST)
90
Sylk-enabled (5 addresses & Analog Output)
2
Floating, Modulating
3
Floating, Modulating
45
Two-Position (SPST)
45
Two-Position (SPST)
,Three-Position, Feedback
, and Feedback
, Three-Position, Feedback
, and Feedback
62-0274-07
SPDT
Aux
Switch
0
0
0
1
0
1
0
1
0
1
0
0
1
0
1
0
1

Advertisement

Table of Contents

   Related Manuals for Honeywell 3 Nm Series

   Summary of Contents for Honeywell 3 Nm Series

  • Page 1 3 Nm, 5 Nm Series Spring Return N314 Direct Coupled Actuators MS3103, MS3105, MS4103, MS4105, MS7403, MS7405, MS7503, MS7505, MS8103, MS8105 INSTALLATION INSTRUCTIONS SPECIFICATIONS MS3103, MS3105, MS4103, MS4105, MS7403, MS7405, MS7503, MS7505, MS8103, MS8105 Spring Return Direct Coupled Actuators (DCA) are used within heating, ventilating, Models: and air-conditioning (HVAC) systems.
  • Page 2 3 NM, 5 NM SERIES SPRING RETURN DIRECT COUPLED ACTUATORS Humidity Ratings: Stroke:95° ±3°, mechanically limited.  5% to 95% R.H., Non-Condensing Approvals: Electrical Connections:  UL873  Field wiring 18 AWG (0.5 mm) to 14 AWG (1.5 mm)  IEC 60730-1 and Part 2–14 conductors (stranded or solid) and up to 2 - 14 AWG (1.5 ...
  • Page 3 ISO 9001 International Quality Control Standards. Actuators shall be or counterclockwise spring return by flipping or turning the as manufactured by Honeywell. unit over. — Damper shaft size (see the Specifications section).
  • Page 4 3 NM, 5 NM SERIES SPRING RETURN DIRECT COUPLED ACTUATORS If the coupling must be moved from one side of the actuator to SELECT SWITCH POSITION the other, reverse the spring return direction and flip the For switch models, select the degree of rotation you want the actuator.
  • Page 5 3 NM, 5 NM SERIES SPRING RETURN DIRECT COUPLED ACTUATORS CAUTION Actuator Damage Hazard. Using actuator as shaft bearing causes device damage. Use actuator only to supply rotational torque. Avoid any side loads to actuator output coupling bearings. CAUTION Equipment Damage Hazard. Can damage the motor beyond repair.
  • Page 6 3 NM, 5 NM SERIES SPRING RETURN DIRECT COUPLED ACTUATORS NOTE: This cover can be removed before or after mounting actuator to the damper shaft or valve linkage. In order to wire the device, the access cover must be removed as follows: S3 S2 S1 1.
  • Page 7 3 NM, 5 NM SERIES SPRING RETURN DIRECT COUPLED ACTUATORS Table 2. Wiring Details. Two-Position Terminal Floating Modulating 3 kOhm Economizer 3 Position Economizer 24Vac/Vdc 120–250 Vac Sylk-enabled power power power power power power power common common common common common neutral common 0°-90°...
  • Page 8 3 NM, 5 NM SERIES SPRING RETURN DIRECT COUPLED ACTUATORS ACTUATOR ACTUATOR 24 VAC 24 VAC 0°-90° 0°-90° 0/2 TO 10 VDC 0/2 TO 10 VDC PROPORTIONING PROPORTIONING 90°-0° 90°-0° CONTROLLER CONTROLLER FEEDBACK FEEDBACK – – 2-10 VDC 2-10 VDC 10-2 VDC 10-2 VDC 0-10 VDC...
  • Page 9 3 NM, 5 NM SERIES SPRING RETURN DIRECT COUPLED ACTUATORS ACTUATOR 24 VAC 3 POSITION MINIMUM POSITION SENSOR FEEDBACK – 2-10 VDC 10-2 VDC 3 POSITION MINIMUM POSITION Fltg, fwd Fltg, rev EXTERNAL MINIMUM POSITION POT CAN BE APPLIED TO 4 90°-0°. SET SWITCH TO 3 POSITION.
  • Page 10 3 NM, 5 NM SERIES SPRING RETURN DIRECT COUPLED ACTUATORS ACTUATOR ACTUATOR 24 VAC 0°-90° OR + 0/2 TO 10 VDC PROPORTIONING 90°-0° OR N/A CONTROLLER FEEDBACK – 2-10 VDC 2... 10 V 10-2 VDC 0... 10 V SPST 0-10 VDC FEEDBACK Service/Off 10-0 VDC...
  • Page 11 3 NM, 5 NM SERIES SPRING RETURN DIRECT COUPLED ACTUATORS Direct Checkout 6. Apply control signal for actuator 0% position. (See Fig. 11 and Table 2.) 1. Mount actuator for required application (either clock- a. (0)2-10 Vdc: apply (0)2 Vdc signal to terminal 3. wise or counterclockwise rotation to open...
  • Page 12 Automation and Control Solutions Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 Honeywell Limited-Honeywell Limitée 35 Dynamic Drive ® U.S. Registered Trademark Toronto, Ontario M1V 4Z9 © 2011 Honeywell International Inc. 62-0274—07 M.S. Rev. 05-11 customer.honeywell.com Printed in U.S.A.

Comments to this Manuals

Symbols: 0
Latest comments: