The following pages have been changed from the previous issue of this document:
page
throughout
All references to "M-Bus" and "Meter Bus" have been deleted.
This Excel 50 controller can be used in two different ways:
1.
The Excel 50 controller can be used with embedded applications. Preconfigured
applications stored in memory in the application module are selected by
entering a specific code via its MMI or an external interface.
2.
The Excel 50 controller can also be used with standard or custom applications
created with the CARE software package and downloaded into the controller.
Custom applications may have different screens and sequences than are shown
in this document. The screens shown here must be considered only as
examples.
Differences between these two uses of the Excel 50 are noted where appropriate.
NOTE: The format of the date is determined by the Engineering Units:
— US - mm/dd/yyyy
— Europe - dd.mm.yyyy
The start-up sequence is an exception to this: The date in the start-up
sequence must always be entered in the European format as shown above.
5
EXCEL 50 - USER GUIDE
REVISION OVERVIEW
change
ABOUT THIS USER GUIDE
EN2B-0137GE51 R0216