Table of Contents
Advertisement
Operating Concept
Screen Pages
Screen page
For displaying the ventilation status
?
Press »
« key.
Display (example):
The standard page shows the ventilation situation at a
glance – reduced to the most important measurement
parameters and curves.
Four measured values are shown on the right, and two
curves on the left.
Other measured values and curves can be selected in
the standard page and all subsequent screen pages.
To select other measured value combinations:
1
Touch screen key »
2
3
To select other curves:
Touch key »
«, and touch the screen key
corresponding to the desired curve.
»Settings« screen
For displaying the setting parameters.
The bottom right-hand side of the screen contains the
screen keys for selecting the ventilation modes.
The screen key displayed in black (IPPV in the example)
represents the currently activated ventilation mode.
The bottom left-hand side of the screen contains the on-
screen rotary control knobs.
The values of the setting parameters are displayed in the
screen knobs relevant to the ventilation mode.
The user-definable start-up settings are marked by an
arrow (j) on the scales of the screen knobs. See
"Configuration" on page 107 onwards.
Changing the settings of an active ventilation mode
Touch the appropriate screen knob, which will change
colour from green to yellow = setting function
enabled.
Turn the rotary knob on the control unit = adjustment
of the value of setting in the screen knob.
Press the rotary knob: the screen knob changes
colour from green to yellow = the setting is confirmed
(validated) and active.
22
« repeatedly.
Advertisement
Table of Contents
