Evita Remote (Optional); Connection - Dräger Evita 4 Instructions For Use Manual

Intensive care ventilator. software 4.n
Hide thumbs Also See for Evita 4:
Table of Contents

Advertisement

Preparation
Evita Remote
Evita Remote
Optional remote control unit (Remote Pad)
The kit may only be installed and programmed by
specialists.
For parallel, remote operation of the following LED and
key functions:
1 Red LED – to indicate warning messages
2 Yellow LED – to indicate caution and advisory
messages
g g g g
3 »
« key – to suppress the alarm tone for approx.
2 minutes
4 »Alarm Reset« key – to acknowledge alarm messages
5 »
Neb.« key – to start and end medicament
nebulisation
6 »O2
suction« key – for bronchial suctioning
7 »Insp. hold« key – for sustained, manually induced
inspiration
8 »Exp. hold« key – for extended and sustained
expiration
The function of the respective LEDs and keys is the same
as that of the corresponding elements on the front panel
of Evita 4 and is described in the application chapters of
the Instructions for Use.

Connection

Plug the lead of the Remote Pad into the socket » «
on the rear of Evita 4. The plug can be connected or
disconnected at any time without impairing operation
of Evita 4.
38
1
2
3
4
5
6
7
8

Advertisement

Table of Contents
loading

Table of Contents