Placing Multiple Calls; Placing A Call With A Speed Dial Key - Yealink T3 Series User Manual

Yealink T3 Series IP Phones User Guide
Procedure
1. Do one of the following:
Start typing a phone number.
l
Select the desired line key (not supported on the T30P/T30 phones).
l
Pick up the handset, press the Speakerphone key or the HEADSET key.
l
2. Enter a number or highlight a contact.
3. Select Send.
Note
: Your system administrator can enable live dialpad feature, which enables your phone to automatically dial out the
phone number after a period of time without selecting
Related Topic
Switching Among the Handset, Speakerphone and Headset Modes

Placing Multiple Calls

When you are in a call, you can hold your current call and place a new call.
Procedure
1. Do one of the following:
Select a line key (not supported on the T30P/T30 phones). The active call is placed on hold.
l
Select Hold to place the original call on hold.
l
Select New Call (NewCall).
2. Enter the desired number or select a contact.
3. Select Send.

Placing a Call with a Speed Dial Key

You can quickly dial a number by using a Speed Dial key.
Before You Begin
If your system administrator has enabled the Favorites feature on the phone, you cannot manually set a Speed Dial
key.
If you are using the T30P/T30 phones, contact your system administrator for assistance setting a Speed Dial key for
you.
Procedure
1. Go to Menu > Features > Dsskey.
2. Select the desired line key.
3. Select SpeedDial from the Type field.
4. Select the desired line from the Account ID field.
5. Do one of the following:
(Optional.) Enter the string that will appear on the phone screen in the Label field.
l
Enter the contact number you want to dial out directly in the Value field.
You can also enter the contact number with the DTMF sequence that you want to send in the Value field. The
contact number and DTMF sequence are separated by commas. One comma stands for 500 milliseconds.
For example, 1234,,123# means the phone dials out the number 1234 first, then after the call is set up for 1
second, it sends the DTMF sequence 123# to the remote party.
On the T33P/T33G phones, highlight the Label or Value field. Select Directory (Dir) and select the desired
l
contact from the Directory list.
6. Select Save.
19
Send
.