Using Headsets; Activating The Headset Mode; Deactivating The Headset Mode; Bluetooth - Yealink SIP-T48S User Manual

Using Headsets

You can use only one headset at a time. The IP phone will use the headset according to the priority: USB/Bluetooth
headset>YHS32/YHS33/wireless headset.
Topics

Activating the Headset Mode

Deactivating the Headset Mode

Switching Among the Handset, Speakerphone and Headset Modes
Placing Calls
Answering Calls
Activating the Headset Mode
After connecting a headset to your phone, you can activate the headset mode and use the headset when answering
and placing calls.
Procedure
1. Press the HEADSET key on the phone.
The HEADSET key LED glows green except on the SIP-T40P/T40G IP phone, and the headset icon appears on the
LCD screen.
Note
You can initiate or end calls by pressing the HEADSET key. Check with your system administrator to find out if it is available
on your phone.
Deactivating the Headset Mode
If you do not want to use a headset to handle calls, you can deactivate the headset mode.
Procedure
1. Press the HEADSET key again on the phone.
The HEADSET key LED goes out except on the SIP-T40P/T40G IP phone, and the headset icon disappears from the
LCD screen.

Bluetooth

The SIP-T48S/T48G/T46S/T46G/T42S/T41S IP phone supports Bluetooth. Bluetooth enables low-bandwidth wireless con-
nections within a range of 10 meters (32 feet). The best performance is in the range of 1 to 2 meters (3 to 6 feet).
Topics

Connecting the Bluetooth USB Dongle BT40

Activating the Bluetooth Mode
Deactivating the Bluetooth Mode
Using Bluetooth Feature
Connecting the Bluetooth USB Dongle BT40
Procedure
1. Insert the USB dongle with "TOP" facing upwards into the USB port on the back of the phone.
Optional Accessories with Your Phone
135