Visual Alert For Monitored Lines; Handling A Remote Call When Visual Alert - Yealink SIP-T48S User Manual

Yealink T4 Series IP Phones User Guide
For the SIP-T42S/T42G/T41S/T41P/T40P/T40G IP phone, navigate to Menu->Settings->Basic Settings->Sound-
>BLF Ring Type.
2. Select the desired ring tone.
The ring tone is played automatically. You can press the Volume key to adjust the tone volume.
3. Press Save.

Visual Alert for Monitored Lines

Your system administrator can enable Visual Alert for BLF Pickup feature, which allows your phone to display the caller
ID when the monitored line receives an incoming call.
Topics

Handling a Remote Call when Visual Alert

Handling a Remote Call when Visual Alert
When the monitored line receives an incoming call, your phone LCD screen displays an incoming call to the monitored
line (for example, from 1008 to 1001). You can pick up the call to monitored line, place a call to monitored line, place a
new call or go back to the Idle screen.
Before You Begin
If you want to pick up a remote call, check with your system administrator to make sure that the directed call pickup
code is set in advance.
Procedure
Do one of the following:
Press Pick Up to pick up the incoming call.
l
The remote phone stops ringing and the call is answered on your phone. The caller ID of the party that initiated the
call appears on the screen.
Press Send to place a call to the monitored line.
l
Press New Call (NewCall) to place a new call.
l
Press Cancel to go back to the Idle screen.
l
Note
If your phone is locked, you cannot use the
more information, refer to
114
Pick Up , Send
Phone Lock
.
, New Call ( NewCall ) and Cancel soft keys until unlocked. For