Managing A Paging Call; Advanced Call Features; Call Park And Call Retrieve; Parking Or Retrieving A Call In The Fac Mode - Yealink W59R User Manual

Managing a Paging Call

During a paging call, you can manage it manually at any time.
You can do the following:
Select Hold to place the current paging call on hold.
•
The paging call is placed on hold and the receiver releases the session.
• Select Resume to resume the held paging call.
The multicast RTP session is re-established.
• Select End to end the paging call.

Advanced Call Features

By using the advanced features, your handset would perform more functions that make your work more efficiently.
If you require additional information or assistance with your new phone, contact your system administrator.

Call Park and Call Retrieve

You can park a call, and then retrieve the call either from your phone or another phone. After parked, the call is placed
on hold, you can continue the conversation after retrieving it.
Note: Call park is not available on all servers. Check with your system administrator to find out if it is
available on your phone.

Parking or Retrieving a Call in the FAC Mode

You can park the call to the local extension or the desired extension through dialing the park code.
Parking a Call in the FAC Mode
You can park a call in the FAC mode directly. When you park a call to the local extension or the desired extension, the
call is held in the same network on your phone.
Your system administrator has set call park in the FAC mode.
1. During a call, select Options > Call Park.
The phone will dial the call park code which is pre-configured.
2. Do one of the following:
• If you want to park the call against the local extension, press the # key.
• If you want to park the call against the desired extension, enter the extension (for example, 4606) where you
want to park the call and press the # key.
If the call is parked successfully, you will hear a voice prompt that the call is parked.
Retrieving a Parked Call in the FAC Mode
You can retrieve a parked call in the FAC mode from any phone within your network.
Your system administrator has set call park in the FAC mode. There is a call parked on the extension. Get the park
retrieve code from your system administrator.
1. Dial the park retrieve code.
2. Follow the voice prompt to retrieve:
• Press the # key on the phone where the call is parked.
• Enter the desired extension followed by # (for example, 4606#) on any phone.
| Advanced Call Features | 26