Transferring A Call By Blf Key; Performing A Semi-Attended/Attended Transfer; Parking Or Retrieving A Call By Blf Key - Yealink T54W User Manual

code from your system administrator.
Procedure
1. When the monitored line receives an incoming call, you can do one of the following:
Press the BLF key to pick up the call for the monitored line directly.
•
Long press the BLF key.
•
The Pick Up, Send, New Call and Cancel appear on the screen.
•
2. Select Pick Up to pick up the call.
If there are multiple incoming calls on the monitored line, select the desired call to pick
•
up.

4.4.6 Transferring a Call by BLF Key

When there is already an active call on the IP phones, you can transfer the active all to the
monitored line by pressing the BLF key.
The phone transfers the active call differently depending on the Transfer Mode via Dsskey feature
configured by your system administrator.
4.4.6.1 Performing a Blind Transfer
During a call, you can transfer the call to the monitored contract in the blind-transfer way.
Before You Begin: Check with your system administrator if the Transfer Mode vis Dsskey is set to
Blind Transfer.
Procedure
1. During a call, you can transfer the call to the monitored line which you want to transfer this
call to.

4.4.7 Performing a Semi-Attended/Attended Transfer

During a call, you can transfer the call to be monitored contact in the semi-attended/attended-
transfer way.
Before You Begin: Check with your system administrator if the Transfer Mode via Dsskey is set to
the Attended Transfer.
Procedure
1. During a call, press the BLF key of the monitored line which you want to transfer this call to.
The phone will dial out the number of the monitored line.
2. Press the BLF key of the monitored line again or Transfer to complete the transfer when the
monitored user receives ring-back or after the monitored user answers the call.

4.4.8 Parking or Retrieving a Call by BLF Key

You can use the BLF key to park a call or retrieve a parked call directly.
MetroNet -Yealink Desk Phones T54W & T57W User Guide
Version 1.0
10.25.2021
61