Rtfm Button - CyberData 011186 Operation Manual

2.3.6 RTFM Button

When the Intercom is operational and linked to the network, you can use the Reset Test Function
Management (RTFM) button (see SW1 in
confirm the Intercom's IP Address and test to see if the audio is working.
Note
Operations Guide
You must do these tests prior to final assembly.
Figure 2-11. RTFM Button (SW1)
931544D
Figure 2-11) on the Intercom board to announce and
Installing the SIP Outdoor Intercom
Intercom Setup
RTFM button (SW1)
CyberData Corporation
20