Rtfm Button - CyberData 011478 Operation Manual

2.3.8 RTFM Button

When the Intercom is operational and linked to the network, you can use the Reset Test Function
Management (RTFM) button (see SW1 in
confirm the Intercom's IP Address and test to see if the audio is working.
Note
Operations Guide
You must do these tests prior to final assembly.
Figure 2-15. RTFM Button (SW1)
931667A
Installing the SIP Outdoor Video Intercom with RFID
Figure 2-15) on the Intercom board to announce and
Intercom Setup
RTFM button (SW1)
CyberData Corporation
25