Securing The Intercom - CyberData 011186 Operation Manual

A.7 Securing the Intercom
Figure A-10
Note: To mount the intercom, use methods
Operations Guide
illustrates how to secure the SIP Outdoor Intercom with Torx screws.
compliant with local electrical codes.
Torx Key
Torx Screws
Caution
Equipment Hazard:
face plate and PCB assembly to the gang box. To prevent over-torque damage to
the gasket, do not apply more than 10 inch-pounds force. Over-torquing will cause
GENERAL ALERT
the gasket to tear, risk moisture intrusion, and effectively void the manufacturer's
warranty.
Figure A-10. Securing the Intercom
Do not use an electric or power screwdriver to fasten the
931544D
Mounting the Intercom

Securing the Intercom

2-Gang Box
Faceplate &
PCB Assembly
CyberData Corporation
98