CyberData 011186 Operation Manual page 28

2.3.6.1 Announcing the IP Address
To announce a device's current IP address:
1. Press and release the RTFM button (see SW1 in
Note
Note
Operations Guide
The device will use DHCP to obtain the new IP address (DHCP-assigned address or default
to 10.10.10.10 if a DHCP server is not present).
Pressing and holding the RTFM button for longer than five seconds will restore the device to
the factory default settings.
Figure 2-12. RTFM Button (SW1)
931544D
Installing the SIP Outdoor Intercom
Figure 2-12) within a five second window.
RTFM button (SW1)
CyberData Corporation
21
Intercom Setup