Main Menu; Monitoring - Ingeteam Ingecon Sun Smart U Installation And Operation Manual

Installation and Operation Manual
INGECON®SUN SMART U
AAS2000IKI05

9.3 Main menu

9.4 Monitoring

Screen 1.
AAS2000IKI05
Rev. _
Date: February 2011
The main menu is structured into the following sub-menus:
MONITORING:
The menu displays the values of the principal parameters and internal va-
riables, providing information on the equipment operating status.
STOP REASONS:
This option shows the five latest reasons for which the inverter has shut
down.
SETTINGS:
This menu displays all the settings affecting the inverter.
INVERTER DATA:
This option displays the inverter data.
12:00
MAIN MENU
Monitoring
Stop reasons
Settings
Inverter data
Select the Monitoring menu and press the
The organisation of the screens and the meaning of the variables in this
menu are indicated below:
12:00
MAIN MENU
Monitoring
Stop reasons
Settings
Inverter data
Pac: Power the inverter is delivering to the Power Grid in kW.
Pdc: Power provided by the solar panels in kW.
Etot: Total energy in kWh delivered by the inverter to the Grid since it left
the factory. The recording of the serial number on the unit marks the start of
this power record.
E.Par: Total energy in kWh delivered by the inverter to the Grid since last
time generated power record was set to zero.
09/01/09
key to access it.
OK
09/01/09
Page 61