Ingeteam Ingecon Sun Smart U Installation And Operation Manual page 48

+
DC plate
-
DC plate
Page 48
INGECON SUN 25 U 208V and INGECON SUN 25 U 480V.
These units are equipped with two copper plates with two M8 holes for
wires with a maximum section AWG 2.
To access these terminals, the protective polycarbonate strip needs to be
removed in INGECON SUN 25 U 208V and INGECON SUN 25 U 480V
models. INGECON SUN 15 U 208V and INGECON SUN 15 U 480V
don't include this protective polycarbonate strip.
After work on the terminals has been completed, it is compulsory to
replace the protective polycarbonate strip.
Installation and Operation Manual
INGECON®SUN SMART U
AAS2000IKI05
AAS2000IKI05
Date: February 2011
Rev. _