Ingeteam Ingecon Sun Smart U Installation And Operation Manual page 3

Installation and Operation Manual
INGECON®SUN SMART U
AAS2000IKI05
About This Manual
Purpose
The purpose of this manual is to describe the Ingecon Sun SMART 15U 208, 15U 480, 25U 208 and 25U
480 and to provide the information required for its correct operation, from reception to start-up, in addition
to the preventive maintenance during operation.
Scope
This manual provides safety guidelines, equipment information and requirements and procedures for
installation and operation.
Audience
All installator who plans to use our equipment in a PV installation according to the requirements of the
"National Electrical Code. ANSI/NFPA70" and any other local codes or laws. The installer itself has to
meet all local and state code requirements.
Scheme
Please read this manual carefully and follow the installation instructions precisely.
Symbol Identifications in this Manual
The following symbols are used in this manual:
WARNING
Warnings advise about situations that could cause personal injury or death.
CAUTION
Cautions advise from situations that could cause damage to the unit or it environment.
AAS2000IKI05
Rev. _
Date: February 2011
Page 3