Figure 12: Service Ip Address Config - Internal Network Adapter - Grandstream Networks IPVT10 Administration Manual

Alternative DNS
NAT
Routing Rules
Use Custom Certificate
Please, refer to the following steps:
1. Login IPVT10 Web UI.
2. Go to "Service Configuration" → "Network Settings", as the figure shown below:
Figure 12: Service IP Address Config – Internal Network Adapter
3. (Optional) Users could configure the domain name of the IPVT10 server, and users have to own
the permission of this domain name. Users also need to point this domain name to the IP address
of the IPVT10 configured address.
Note: If users configure the internal IP address and external IP address for the IPVT10 server, users
need to point the internal network of the domain name to the internal IP address of the IPVT10 server,
and point the external network of the domain name to the external IP address of the IPVT10 server.
4. According to the actual requirements, users could configure the 1 or 2 network adapters. Users
could configure Internal Network Adapter only, External Network Adapter only, or both.
Set the Alternative DNS.
Enable/Disable NAT, and set the NAT IP address.
Set the advanced configuration Routing Rules to ensure
accessing the destination IP address when using two Network
Adapters.
Configures the key of the custom certificate.
IPVT10 Administration Guide
Version 1.0.2.8
P a g e | 36