Accessing The Configuration Page Via Ipvideotalk Portal; Figure 7: Connect Ipvt 10 With A Pc Directly - Grandstream Networks IPVT10 Administration Manual

2. Then, connect the Ethernet Port 1 and a PC with an Ethernet cable as shown in the figure:
3. Enter the IP address (http://192.168.88.88) of the equipment in the browser of the PC, and press
"Enter" to access the configuration page.
4. Input login user name and password (The default user name is "admin", and the default password
is "change_me").
5. (Optional) Users could select the language on the list at the bottom of the configuration page.
6. Click to login the configuration page.
Note:
After the configurations are complete, users must unplug the Ethernet cable from Ether Port 1, and
reconnect the server to the Gigabit Ethernet switch to ensure that the two Ethernet ports of the equipment
are connected to the Gigabit Ethernet.

Accessing the Configuration Page via IPVideoTalk Portal

Users could log into IPVT10 Web Interface via IPVideoTalk portal by clicking on "Maintenance". Please,
refer to the following figure:

Figure 7: Connect IPVT 10 with a PC Directly

IPVT10 Administration Guide
Version 1.0.2.8
P a g e | 29