Parameters
Destination IP Address
Subnet Mask
Gateway
Network Adapter
8. (Optional) If users set the domain name as the in the IPVT10, users could also set "Use Custom
Certificate" as the screenshot shows below:
9. Continue to fill in the other configuration options. For the first deployment, users have to fill in all
required fields.
10. User could click to save the configuration, and click on "Apply Now" to apply the entire
configurations of this page to the server. When the deployment is complete, it will take effect
immediately.
Notes:
•
When the deployment is complete, users need to check whether all network interfaces of the server
are all connected. For a single network, only one network interface needs to be connected to the
Figure 14: Configure Network Routing Rules
Table 13: Configure Network Routing Rules
This is used to configure the destination IP address for the network. This
option has to be configured with the Subnet Mask option.
This is used to configure the subnet mask.
This is used to configure the gateway of the destination network.
This is used to select the server network adapter for destination network.
Figure 15: Use Custom Certificate
IPVT10 Administration Guide
Version 1.0.2.8
Description
P a g e
| 38