Advanced Settings; Reboot; Enable/Disable Ssh; Figure 30: Cluster Settings - Grandstream Networks IPVT10 Administration Manual

3. Input the IP address of the cluster host server. This IP address has to be a reachable address for
the slave server.
4. Input the Cluster Code in slave server (case sensitive).
5. Users need to click to save the configuration, and click on "Apply Now" to update the server time
immediately.

Advanced Settings

Reboot

Users could reboot the IPVT10 server on its Web UI.
Steps:
1. Login IPVT10 Web UI.
2. Click on "Advanced Settings".
Click on "Reboot" to reboot the IPVT10 server, and the current meetings which are in progress
3.
will be terminated.

Enable/Disable SSH

Users could enable/disable SSH service on IPVT10's Web UI. Please, refer to the following steps:
1. Login IPVT10 Web UI.
2. Click on "Advanced Settings".
3. The default SSH port is 26222, and users could change the SSH port by editing the port number
directly.
4. Click on "Enable SSH".
5. If users want to disable the SSH service, please click on button "Disable SSH".

Figure 30: Cluster Settings

IPVT10 Administration Guide
Version 1.0.2.8
P a g e | 56