Equipment Specifications; Mounting Ipvt10 Equipment To Cabinet; Table 6: Ipvt10 Equipment Specifications - Grandstream Networks IPVT10 Administration Manual

USB Interfaces 3
4
and 4
USB Interfaces 5
5
and 6
1000M Ethernet
6
Interface 1
1000M Ethernet
7
Interface 2
VGA Input
8
Interface

Equipment Specifications

Name
Power Supply
Applicable Cabinet
Equipment Size
USB Interfaces
LAN Interfaces
Display Interfaces
Operating Temperature

Mounting IPVT10 Equipment to Cabinet

Users can install the IPVT10 in a 19-inch cabinet that conforms to the IEC (International Electro-Technical
Commission) 60297 standard.
1. The IPVT10 server is heavy and we suggest to carry it by two people at least.
2. The cabinet has been installed and we suggest a space of at least "2U" (1U=44.45mm) needs to be
reserved.
3. Users can select the regular rail for installation, or optional installation.
USB 2.0, this is used to connect with USB cable or USB memory stick
USB 3.0, this is used to connect with USB cable or USB memory stick
Connect to the network LAN port, connect with a PC to access the
configuration page of the server
Connect to the network LAN port
Connect to a VGA input equipment

Table 6: IPVT10 Equipment Specifications

550W. (Redundancy PSU)
2U Rackmount Design, and it supports 19" cabinets and rails.
Base Equipment Size:
Height 88mm * Width 430mm * Depth 650mm.
3x USB 3.0 (2 rear, 2 via header).
3x USB 2.0 (2 rear, 2 via header).
2x RJ45 Gigabit Ethernet LAN ports.
1x RJ45 Dedicated IPMI LAN port.
1 x VGA port.
0℃ - 45℃.
IPVT10 Administration Guide
Version 1.0.2.8
Description
P a g e | 20