Cluster Code; Figure 26: Region Management - Grandstream Networks IPVT10 Administration Manual

Note:
•
The connected IPVT10 servers amount for each region in the list is indicating that the available IPVT10
servers amount, it does not include the blocked servers.
•
Users could add new regions, input the region name and click "Save" button to save the regions.
•
Users could also update the region name for a certain region, and click "Save" button to save the region
name.
•
Users need to click on "Apply Now" to effect on the device.

Cluster Code

Users could generate a new cluster code in the cluster, and all slave servers cannot connect with the cluster
host server without the new cluster code.
Please, refer to the following steps:
1. Login IPVT10 Web UI.
2. Go to "Service configuration" → "Cluster Settings", and click on the button
generate a new cluster code for the cluster service.
3. Users need to click on "Save" button to save the configuration, and click on "Apply Now" to effect
on the device. Then, all slave servers cannot connect with the cluster host server without the new
cluster code. Users need to input the cluster code again in the slave servers in order to recover the
connection with the cluster host server.

Figure 26: Region Management

IPVT10 Administration Guide
Version 1.0.2.8
to
P a g e | 51