Table of Contents
Advertisement
Dialing a Number via Call History
1.
On the LCD display device, access Applications on home screen and access call history by selecting
.
the icon
2.
The LCD will display all call history types. Navigate in the call history list by selecting the call history
category. Select the call history entry you would like to dial out.
3.
Press
on the remote control to dial out.
Direct IP Call
Direct IP Call allows GVC3200/GVC3202 and another VoIP device to talk to each other in an ad-hoc fashion
without a SIP proxy. Direct IP calls can be made if:
•
Both GVC3200/GVC3202 and VoIP phone have public IP addresses, Or
•
Both GVC3200/GVC3202 and VoIP phone are under the same LAN / VPN using private or public IP
addresses, Or
•
NAT is disabled or GVC3200/GVC3202 NAT is disabled.
Both devices can be connected through a router using public or private IP addresses (with necessary port
forwarding or DMZ).
To make a direct IP call, please follow the steps below:
1.
Access the dial screen on GVC3200/GVC3202 LCD.
2.
Press the red shortcut key on the remote control to bring up call mode setting screen, set the mode to
"IP Call". This step is optional.
3.
Input the target IP address. For example, if the target IP address is 192.168.124.123 and the port is
5062, input the following:
192*168*124*123#5062
The * key represents the dot (.) and the # key represents the colon (:).
4.
Press the yellow shortcut key on the remote control to select "Audio Call" or "Video Call".
on the remote control to dial out.
5.
Press
GVC3200/GVC3202 User Guide
Version 1.0.3.64
P a g e
|
61
Advertisement
Table of Contents
