Configuring Ipvt10; Table 8: Ipvt10 Server Meetings Performance - Grandstream Networks IPVT10 Administration Manual

CONFIGURING IPVT10

Current Max
Meeting Video Max Participants
Number Feeds
300 (Dual NICs)
1 120
200 (Single NIC)
2 120
4 120
6 120
8 120
10 120
Note:
Under poor network condition, packets loss will cause the performance degradation.

Table 8: IPVT10 Server Meetings Performance

•
If the participant only uses single NIC to join into the
conference, it only supports 200 participants in the
conference which is limited by the bandwidth.
•
If the participants use dual NICs at the same time,
the participants could use different IP addresses to
join into the meeting, and the participants amount is
up to 300.
•
Supported H.264/VP8
•
200 Supported H.264/VP8
•
With more conferences at the same time for the
server loading, the maximum number of participants
160
in the conference will be less.
•
Supported H.264/VP8
•
With more conferences at the same time for the
server loading, the maximum number of participants
140
in the conference will be less.
•
Supported H.264/VP8
•
With more conferences at the same time for the
server loading, the maximum number of participants
130
in the conference will be less.
•
Supported H.264
•
With more conferences at the same time for the
server loading, the maximum number of participants
120
in the conference will be less.
•
Supported H.264
IPVT10 Administration Guide
Version 1.0.2.8
Descriptions
P a g e | 25