CONFIGURE GVC32XX CONFERENCE CLIENTS
Configure Service IP Address
Before a conference starts on the GVC32xx client, the user must configure the IP address of the IPVideoTalk server. Please,
refer to the following steps for the IP address of IPVideoTalk.
1. Start the GVC32xx device, and ensure to connect the GVC32xx client to the network correctly
2. Click on the IPVideoTalk application.
3. Select the "Settings" icon
4. Input the "IPVideoTalk Server" address which is the IP address of the IPVT10 server.
5. Click to save the configuration, and the device will connect to the IPVideoTalk server automatically. The device will be
automatically assigned an IPVideoTalk ID, starting from "100". If the IPVideoTalk ID status icon turns green, that means the
account could be used normally.
START CONFERENCES
When the server is configured, users could use the conference client to start conferences.
1. Input the domain name or IP address of the IPVT10 server in the browser.
, and go to the configuration as shown below:
Figure 61: Configure Service IP Address