Figure 6: Ipvt10 Web Gui - Login - Grandstream Networks IPVT10 Administration Manual

Users need to follow the steps below to log in into IPVT10 Web UI:
1. Please make sure that the IP address of the computer is under the same network segment as the
server's. If not, users need to go to "Network" configuration page of the computer to setup the
network segment as the same as IPVT10 server's.
2. Enter the default IP address (http://192.168.88.88) of the equipment in the browser of the PC, and
press "Enter" to access the configuration page, as the screenshot shows below:
3. Input login user name and password. (The default user name is "admin", and the default password
is "change_me").
4. (Optional) Users could select the language on the list at the bottom of the configuration page.
5. Click to login the configuration page.
If there is an IP conflict, users can connect the PC directly to the server via an Ethernet cable for
configuration purpose. Follow the steps below:
1. Unplug the Ethernet cable from the Ethernet Port 1 on the IPVT equipment (the first cable interface
from left to right in the figure).
•
If there is a sticker on the device with the random default
password, please use the password on the sticker as the
default login password.

Figure 6: IPVT10 Web GUI - Login

IPVT10 Administration Guide
Version 1.0.2.8
P a g e | 28