Update Login Password; Figure 8: Accessing The Ipvt10 Configuration Page Via Ipvideotalk Portal; Figure 9: Modify Password - Grandstream Networks IPVT10 Administration Manual

Figure 8: Accessing the IPVT10 Configuration Page via IPVideoTalk Portal

Update Login Password

When users first-time log in to IPVT10 Web Deployment Platform, it is recommended to modify the
password of the administrator account to ensure the security of the system. Refer to the following steps:
1. Login to the Web page of IPVT10.
2. Click on the option "Advanced Settings → Modify Password" to access the configuration.
3. Input "Original Password", "New Password", and "Confirm New Password".
4. Click to save the configuration, and the system will prompt to save successfully. If the original
password is incorrect, or the new password format is incorrect, the corresponding error will be
prompted.
Note:
The password has to contain two of the numbers, lowercase letters, uppercase letters, and special
characters, and the length is limited to 8-16 characters.

Figure 9: Modify Password

IPVT10 Administration Guide
Version 1.0.2.8
P a g e | 30