3. It shows the current time of the server by default.
4. Users could set whether or not to synchronize the SNTP server time. If there is no available SNTP
server, users could adjust the date and time manually.
Users could click on "Apply Now" to update the server time immediately.
5.
Configure SIP Trunk Service Address
(Optional) Users could configure the SIP Trunk server address based on the actual requirements. If users
configure this service, users could use PBX platform or PSTN Trunk server to connect via IPVideoTalk
conference system, user also cloud set DialPlan to dial out the 3
•
Connecting to the IPVideoTalk Conference System with 3
In order to connect the IPVideoTalk Conference System with a 3
following steps:
1. Login IPVT10 Web Management UI.
2. Go to "Service Configuration→SIP Trunk Settings", users will see the page below:
Figure 17: Time Settings
Figure 18: SIP Trunk Service Configuration - Access
IPVT10 Administration Guide
Version 1.0.2.8
party PBX platform.
rd
Party Platform (PBX or PSTN)
rd
rd
party platform, please refer to the
P a g e
| 41