Configuration Instructions; First-Time Configuration; Configuration Parameters Modification; Table 9: Steps For First-Time Configuration - Grandstream Networks IPVT10 Administration Manual

Configuration Instructions

Users could manage and configure the IPVT10 configuration information by logging in the Web UI of IPVT10
server via an installed browser in the PC.

First-time Configuration

Users need to properly follow the steps listed in the table below at the first login.
Steps
Configure Service IP
Address
Configure SMTP Mailbox
Configure Conference
Management Platform
Information
Note: Each one of the steps is described in the next sections. Please, refer to the following sections for
more details about IPVT10 initial configuration.

Configuration Parameters Modification

After the deployment is completed, users can modify the configuration parameters.
Parameters
Update Service IP Address
Update SMTP Mailbox

Table 9: Steps for First-time Configuration

According to the configuration of the network solution, configure the
service IP address. Support to configure dual network adapters, NAT, and
routing rules.
The SMTP mailbox is used as a sender to send the meetings invitation
Emails, meetings notification Emails and etc. Users could configure
Enterprise email as SMTP Mailbox.
This is used to configure the login account, enterprise information, default
language, default time-zone, and other information on the platform.

Table 10: Modify Configuration Options

Please configure this parameter carefully:
•
If the IP address of the IPVT10 is updated during a meeting, the
meeting will encounter abnormal issues. The URLs of the scheduled
meetings will be inaccessible.
•
When the IP address of the IPVT10 is updated, the service will be
restarted automatically.
When the SMTP Mailbox is updated, it will take effect immediately, and
does not affect other data.
IPVT10 Administration Guide
Version 1.0.2.8
Description
Description
P a g e | 26