Configure Ipvt10 Server Region; Figure 23: Check Slave Server's Information - Grandstream Networks IPVT10 Administration Manual

3. Users could click on the IP address of the slave server, and login the Web UI of the slave server
with the credentials.
4. Users could click on the icon
is blocked, the slave server IPVT10 cannot establish the connection with the cluster host server,
and the cluster host server IPVT10 cannot negotiate with this slave server. Users could also click
on icon to cancel blocking and recover the connection between the slave server and the host
server.
5. If the connection between the slave server and host server is lost, or the slave server is not available
any more, users could click on icon
6. Users need to click on "Save" button to save the configuration, and click on "Apply Now" to effect
on the device.

Configure IPVT10 Server Region

Users could manage the clustered IPVT10 servers by different regions. For example, if IPVT10 servers A,
B, C are assigned to region 1, and IPVT10 servers D, E are assigned to region 2, for the GVC devices or
IPVideoTalk IDs which are assigned to region 1 can only use the resources in the IPVT10 servers which
belong to region 1, and they cannot access to use the resources in region 2.
1. Login IPVT10 Web UI.
2. Go to "Service configuration" → "Cluster Settings", users could view the Host/Slave Servers List.
3. Users could change the region of the IPVT10 server under "Region" menu by clicking the drop-
down menu. The default setting is "Local". If users want to add new region, please click on the
"Settings" icon besides "Region" menu option, as the following figure shows.

Figure 23: Check Slave Server's Information

to block the connection of the slave server. When the connection
to delete the slave server.
IPVT10 Administration Guide
Version 1.0.2.8
P a g e | 49