Factory Reset; Reboot; Network; Bluetooth - Grandstream Networks GVC3210 Administration Manual

https://arttel.ru/

Factory Reset


Factory Reset
Restore to the factory settings. If the user clicks on "Factory reset" and confirms it, the GVC3210 will
also format the internal Micro SD card storage in the device during factory resetting.
--------------------------------------------------------------------------------------------------------------------- -----------------------
Note:
Please backup the important files or settings before factory resetting.
--------------------------------------------------------------------------------------------------------------------- -----------------------

Reboot


Reboot
Click the REBOOT button to reboot device.

Network

Users can configure Bluetooth, Ethernet, Wi-Fi, Proxy, VPN, VLAN, LLDP and 802.1x under Network
settings here. Some of the configurations here such as Bluetooth, Wi-Fi and VPN settings are not available
in web UI.

Bluetooth


Paired Devices
Display paired devices such as Bluetooth remote control, Android mobile phone, Bluetooth speaker and
etc.

Available Devices
Display all devices in the search range which have enabled Bluetooth.

Ethernet

Preferred Internet Protocol
Select one of the following IP protocol modes:

IPv4 Only: Enforce IPv4 protocol only.

IPv6 Only: Enforce IPv6 protocol only.

Both prefer IPv4: Enable both IPv4 and IPv6 and prefer IPv4.

Both prefer IPv6: Enable both IPv4 and IPv6 and prefer IPv6.
Note: By default, DHCP is used for the device to obtain IP address from LAN network.
https://arttel.ru/shop/terminaly-vks/grandstream-gvc3210
GVC3210 Administration Guide
Version 1.0.1.21
P a g e | 26