Figure 13: Service Ip Address Config - Internal Network Adapter - Grandstream Networks IPVT10 Administration Manual

5. Users need to configure "IPv4 Address", "Subnet Mask", "Gateway", "Preferred DNS", "Alternative
DNS" (optional) for the network adapter.
Note: Please make sure that there should be no conflict in the IP address. Otherwise, the service will
be unavailable.
6. (Optional) If the selected adapter is external network adapter, users could configure static NAT for
the IPVT10.
Note: NAT could translate the private IP address of the internal network into a public IP address, so
that an external conference client can access the server of the internal network through the public
network.
Figure 13: Service IP Address Config – Internal Network Adapter
7. When two network adapters are configured, users have to configure the routing rules based on the
actual requirements by clicking on
server. Users can also edit and delete a certain routing rule.
Note: Routing rules must be specified for the external network and all network segments in the
enterprise.
. Multiple routing rules can be configured in the IPVT10
IPVT10 Administration Guide
Version 1.0.2.8
P a g e | 37