Cluster Host Server Configuration; Network Settings; Table 12: Parameters Descriptions - Grandstream Networks IPVT10 Administration Manual

This icon means that the drive letter is rebuilt, and the specific disk symbol is displayed. After
the reconstruction is successful, it will return to normal.

Cluster Host Server Configuration

Network Settings

The IPVT10 server supports two network adapters that can be configured based on the actual requirements.
There are 5 typical network deployment Scenarios:
•
Scenario 1: The server is deployed on the internal network. The end users use the service only
within the internal network. Users could only configure the internal network IP address.
•
Scenario 2: The server is deployed on the external network. The end users use the service via the
public network. Users need to configure the external IP address.
•
Scenario 3: The server is deployed on the internal network. The end users use the service via the
public network. In this case, users need to configure the internal IP address and NAT in the server.
•
Scenario 4: The server is deployed on the internal network. The end users can use the service via
both internal and external network. In this case, users need to configure the server with both internal
network and external network, and routing rules.
•
Scenario 5: The server is deployed on the internal network. The end users can use the service via
the internal network and limit certain external IP address to access the service. In this case, users
need to configure internal network, external network, NAT, and routing rules in the server.
Options Descriptions
Parameters
Native Domain Name
Internal Network Adapter
External Network Adapter
IPv4 Address
Subnet Mask
Gateway
Preferred DNS

Table 12: Parameters Descriptions

Description
Configures the domain name of IPVT10 server.
Configures Internal Network Adapter's parameters.
Configures External Network Adapter's parameters.
Configures the IP Address for IPVideoTalk Portal.
Configures the Subnet Mask.
Configures the default Gateway.
Set the Preferred DNS.
IPVT10 Administration Guide
Version 1.0.2.8
P a g e | 35