Settings/Ipvideotalk/General; Settings/Ipvideotalk/Call - Grandstream Networks GVC3210 Administration Manual

https://arttel.ru/

Settings/IPVideoTalk/General

Parameters
Account Active
Current Plans
Display Name
SIP Transport

Settings/IPVideoTalk/Call

Parameters
Auto Answer
When Idle
Call forwarding
Mode
https://arttel.ru/shop/terminaly-vks/grandstream-gvc3210
Descriptions
It is used to indicate whether if the built-in IPVideoTalk account is active. The default
setting is "Enabled".
This field indicates the current plan of IPVideoTalk Cloud Service.
It is used to define the displayed name shown on the callee side once the GVC3210
makes an IPVideoTalk call.
It is used to set the protocol used to transport the SIP messages (TCP or TLS). The
default setting is "TLS".
Descriptions
If the GVC3210 is not in a call/in a meeting/not busy, the GVC3210 will auto answer
the incoming call even during the sleep mode. The default setting is "No".
It is used to set the Call Forwarding feature for this account.

None:
Setting the feature to "None" will disable Call Forward.

Unconditional:
If set to "Unconditional", it will forward all calls to a particular number

Time based:
With "Time Based" forward, set a time range for the calls to be forwarded:
Time period:
-
Configures the period of time to forward the call when "Time based" Call
Forward type is used. The time is 24-hours format HH:mm, 10:00 for example.
In time forward to:
-
When "Time based" Call Forward Type is used, specifies the number to be
forwarded to within the configured Time Period above.
Out time forward to:
-
When "Time based" Call Forward Type is used, specifies the number to be
forwarded to when it's not within the configured Time Period.

Others:
When set to "Others", the call forwarding rules can be customized based on following
options:
GVC3210 Administration Guide
Version 1.0.1.21
P a g e | 53