Accessing The Configuration Page Via Ipvideotalk Portal; Update Login Password - Grandstream Networks IPVT10 Administration Manual

3. Enter the default IP address (http://192.168.88.88) of the IPVT10 equipment in the browser of the computer, and press
"Enter" to access the configuration page.
4. Input login username and password
5. (Optional) Users could select the language on the list at the bottom of the configuration page.
6. Click to log in to the configuration page.
Note
After the configurations are complete, users must unplug the Ethernet cable from Ether Port 1 and reconnect the server to the
Gigabit Ethernet switch to ensure that the two Ethernet ports of the equipment are connected to the Gigabit Ethernet.

Accessing the Configuration Page via IPVideoTalk Portal

Users could log into IPVT10 Web Interface via IPVideoTalk Portal by clicking on "Maintenance", as per the following figure:

Update Login Password

When users first-time login to IPVT10 Web Deployment Platform, it is recommended to modify the password of the
administrator account to ensure the security of the system. Refer to the following steps:
1. Log in to the Web page of IPVT10.
2. Click on the option "Advanced Settings �� Modify Password" to access the configuration.
Figure 8: Connect IPVT 10 with a PC Directly
Figure 9: Accessing the IPVT10 Configuration Page via IPVideoTalk Portal