Detergent And Drying Agent (Possible Option) - Wexiodisk WD-6 Installation And User Manual

Installation instructions

3.5.6 Detergent and drying agent (possible option)

•
•
•
•
The detergent is positioned below the plugged connection for the detergent hose
(6). The use of our shelf would be appropriate WD203.0663
•
•
•
•
•
•
Glasstilt
Check what your machine is equipped with, which depends on the model,
machine type and country.
Use the same make and type of detergent and drying agent.
With machines connected to cold water, the water pipe temperature may
be too low for use of powder or paste type detergents.
If liquid detergent is used together with Wexiödisk's detergent pump, the
detergent must be placed under the machine's tank level.
There is a plugged hole for a detergent hose on the back and end of the
machine (6).
The detergent hose is connected to the pipe (E) at the top of the chemical
washing tank on the right-hand side (see the figure below). There is a
connection nipple in the pipe (F).
If detergent paste is being used, the connection nipple must be removed
and the hose connected directly to the pipe (E).
If liquid detergent is used, the nipple must be left in the pipe. Drill a hole
through the nipple and connect the hose to the nipple.
The measuring cell for measuring the concentration of detergent in the
washing water must be put in the bottom of the tank. On the inside bottom
of the tank next to the heating element, the letter "C" is stamped into the
metal to mark where the hole should be drilled.
The water outlet for detergent (4) is on the demi water pipe (3).
16
Rev. 2.0 (202202)