Delivery Recommendations - ST STM32303C-EVAL User Manual

UM1567
1.4

Delivery recommendations

Before using the board for the first time, please verify that nothing was damaged during
shipment and that no components are unplugged or lost.
When the board is extracted from its plastic bag, please check that no component remains
in the bag.
The main components to verify are:
1. The 8 MHz crystal (X2) which may have been removed from its socket by a shock.
2. The MicroSD card which may have been ejected from the CN16 connector (right side
of the board).
3. The dual-interface EEPROM board (ANT7-M24LR-A) which may have been unplugged
from the CN1 connector (top left corner of the board).
For all information concerning the version of the MCU used on the board, its specification
and possible related limitations, please visit the ST web site to download the relevant data
sheet and erratasheet.
Warning: This equipment contains parts (principally an LCD), subject to
be damaged by electrostatic discharge (ESD). Before touching
the LCD or its connector (CN1 on MB895), use one of these
following ESD precautionary procedures:
Wear a ground strap. The function of such strap is to rapidly
and safely dissipate personnel static charge to the ground.
Touch the ground before all other nets or components on
board. The easiest way to proceed is to touch with a finger the
shield available on DB9 connectors (CN3 & CN8), USB
connector (CN5) or uSD card connector (CN16).
Doc ID 023581 Rev 2
Overview
7/58