Overview; Features; Demonstration Software; Order Code - ST STM32303C-EVAL User Manual

Overview

1 Overview
1.1

Features

Four 5 V power supply options: Power jack, ST-LINK/V2 USB connector, User USB
connector or daughter board
2
I S Audio DAC, stereo audio jack which supports headset with microphone
2-Gbyte or more SPI interface MicroSD card
2
I C compatible serial interface temperature sensor, EEPROM and RF EEPROM
RS232 and RS485 communication
IrDA transceiver
JTAG/SWD and ETM trace debug support, ST-LINK/V2 embedded
1-Mbit SPI serial Flash memory
240x320 TFT color LCD connected to the SPI interface
Joystick with 4-direction control and selector
Reset, Tamper or Key button
4-color user LEDs and high brightness LED
Humidity sensor
Extension connectors for daughter board or wrapping board
MCU voltage choice: 3.3 V or adjustable from 2.0 V to 3.6 V
USB FS connector
Touch-sensing buttons
RTC with backup battery
CAN2.0A/B compliant connection
Light-dependent resistor (LDR)
IR LED and receiver
Potentiometer
2 motor control connectors
1.2

Demonstration software

The demonstration software is preloaded in the board's Flash memory for an easy
demonstration of the device peripherals in standalone mode. For more information and to
download the latest version available, please refer to the STM32303C-EVAL demonstration
software available on www.st.com.
1.3

Order code

To order the STM32F303VCT6 evaluation board, use the STM32303C-EVAL order code.
6/58 Doc ID 023581 Rev 2
UM1567