Infors HT Ecotron Operating Manual page 23

Brief description
Stacking equipment
03 May 2018
The Ecotron incubation shaker is used to cultivate micro-organisms
in a laboratory environment. The Ecotron has been designed as an
incubation shaker but can optionally be used as an incubation
cover without the shaker for tempering different types of equip-
ment.
The basic version of the equipment is fitted with a shaker drive and
a heater. The equipment can be optionally fitted with an integrated
cooling system or connected to an external cooling system.
All the electronics and control electronics are located in the top of
the casing and can be replaced easily if necessary. The equipment
can be operated locally via the operating panel on the front.
If necessary, two units of equipment can be stacked to save space.
The optional stack set is required to do so. This set includes all
material required for securely affixing the unit at the top to the unit
at the bottom. If two units are stacked, you have to keep in mind
that the maximum permissible shaker speed is limited for the top
unit in the stack.
For information on correctly stacking the units of equipment, see
chapter 6.2.2 "Stacking Equipment", page 44.
Ecotron - Incubation Shaker
Setup and Function
Page 21 of 90