Incorrect Auxiliary Supplies And Consumables; Incorrect Spare Parts; Particular Hazards; Danger Due To Hot Surfaces - Infors HT Ecotron Operating Manual

Ecotron - Incubation Shaker
Safety and Responsibility

2.6.3 Incorrect Auxiliary Supplies and Consumables

2.6.4 Incorrect Spare Parts

2.7 Particular Hazards

2.7.1 Danger due to Hot Surfaces

Page 16 of 90
The use of incorrect auxiliary supplies and consumables can lead
to both equipment failure and injury/damage to health.
The auxiliary supplies and consumables required for use with the
equipment are specified in the relevant sections of this manual.
Incorrect spare parts, imitations or spare parts that have not been
authorised by the manufacturer represent a significant safety risk.
As such, we recommend procuring all spare parts from an author-
ised dealer or directly from the manufacturer.
For the contact details of the manufacturer's representatives, see
page 2.
This section covers particular hazards and residual risks that may
arise when using the equipment for special applications in accord-
ance with normal, intended use.
Since the use of the equipment for such applications is deliberate,
it is the responsibility of the operators and the provider to ensure
that all personnel are protected from potential damage to health.
The provider is responsible for ensuring that the appropriate pro-
tective equipment for such applications is provided, and that the
necessary infrastructure is in place.
For applications that are performed with temperatures over 55 °C,
there is a danger of burns on hot surfaces in the interior or on the
cultivation vessels.
For applications with temperatures over 55 °C wear heat-re-

sistant protective gloves.
03 May 2018