Resetting The Quiesce State In The Transfer Process; Administering An Sp File Transfer Trigger - HPE 3PAR StoreServ Software User's Manual

Procedure
1. On the SPOCC home page, in the left navigation pane, click SPmaint.
2. Click SP Control/Status.
3. Click Mount a CDROM or Unmount a CDROM.
To mount physical media using SPMAINT:
1. Insert a CD into the CD-ROM of the SP.
2. From the SPMAINT main menu, enter 1 for SP Control/Status, then press ENTER.
3. Enter 9 for Mount a CDROM from the SP main menu, then press ENTER.
4. When prompted, enter y, then press ENTER to mount the CD.
To unmount physical media using SPMAINT:
1. Enter 10 for Unmount a CDROM, then press ENTER.
2. When prompted, enter y, then press ENTER.
3. Remove the physical media from the media drive.

Resetting the Quiesce State in the Transfer Process

The transfer control process (SPtransfer) can quiesce itself for varying lengths of time because of errors
in transmission, a change in the state of the CCA, or for other purposes. Use the Reset Quiesce state in
Transfer process option on the SP Transfer Settings menu to force the SPtransfer command to quit its
quiesced state. This is mainly a diagnostic operation.
To force the transfer process to reset using SPOCC:
Procedure
1. On the SPOCC home page, in the left navigation pane, click SPmaint.
2. Click SP Control/Status.
3. Click Reset Quiesce State in Transfer Process.
To force the transfer process to reset using SPMAINT:
1. From the SPMAINT main menu, enter 1 for SP Control/Status, then press ENTER.
2. Enter 8 for Reset Quiesce state in Transfer process, then press ENTER.
NOTE: When using SPOCC or SPMAINT, this option does not display any menu output, even though the
signal is sent to the process. It is not necessary to confirm this action.

Administering an SP File Transfer Trigger

Use the SP File Transfer Trigger option on the SP Control menu to force the logging function on the SP to
switch to a new log and queue the old one for transfer to the connection portal. This is done mainly for
diagnostic purposes at the request of an 3PAR Authorized Service Provider or a local service provider.
To force a transfer trigger using SPOCC:
18 SP Control/Status Functions