Editing Predefined Symptoms
To edit the list of predefined symptoms available for use in creating a symptom notification record:
Procedure
1. In the left navigation pane of the SPOCC menu, click Setup.
2. Under Notification Maintenance Utilities, click the Predefine Symptoms option.
The Predefine Symptoms screen appears.
3. On the Predefine Symptoms screen, click the Edit icon for the symptom record to be edited.
The Update Predefined Symptom screen appears.
4. On the Update Predefined Symptom screen, edit the symptom and description fields as necessary.
5. Click Update Record to apply the new settings.
6. Click Return to Setup Menu to return to the Notification Maintenance Utilities menu.
Deleting a Predefined Symptom
To delete a symptom from the list of predefined symptoms available for use in creating a symptom
notification record:
Procedure
1. In the left navigation pane of the SPOCC menu, click Setup.
2. Under Notification Maintenance Utilities, click the Predefine Symptoms option.
The Predefine Symptoms screen appears.
3. On the Predefined Symptoms screen, click the Delete icon for the symptom to be deleted.
4. When prompted, click OK to confirm.
5. Click Return to Setup Menu to return to the Notification Maintenance Utilities menu.
Editing Default Shifts and Exceptions
The Edit Default Shift and Shift Exceptions option available through the Notification Maintenance Utilities
menu enables you to manipulate the prime shift and prime shift exception defaults.
Use the Edit Default Shift and Shift Exceptions option on the Notification Maintenance Utilities menu
to perform the following tasks:
•
Editing the global default shift pattern
•
Adding, editing, and deleting default prime shift exceptions for all user profiles
Using the Global Default Shift Pattern
The global default shift pattern is the default prime shift pattern that is applied whenever your user profile
does not have a specific prime shift pattern defined. For example, if you delete all prime shift patterns
associated with your user profile, the global default shift pattern must be applied. You can edit the global
default prime shift pattern, but you cannot delete this default or add additional defaults.
To edit the global default shift pattern that is applied when your user profile does not have any prime shifts
defined:
50
Local Notification Service